Interior blinds Basic

Hip rafters

Slat 25 mm

Wing installation

Call

Don't know what to do?

We will help you

Call: 045 / 672 60 50

Write: info@ksystem.eu

Ask without obligation

Evaluation: 3.4 - 5 votes

Description

The Basic Design blinds are standard interior horizontal blinds designed for windows with insulating double glazing. The top rail of the blind blends seamlessly with the window frame and glazing bead, and is available in standard colors such as dark brown, medium brown, light brown, white, and silver. For wood-effect finishes, the rail can be ordered in golden oak, light oak, mahogany, cherry, spruce, and alder.

The slats can be ordered in both standard and blackout versions. In the blackout version, when the slats are tilted to one side, they form a compact shading surface. This effect is achieved by a special perforation method and denser ladders with a greater number of slats. The blinds are operated by a bead chain connected by a coupling. A wide range of slat and rail colors, including wood imitations, satisfies even the most demanding customers. Do you have non-standard windows? Basic Design interior horizontal blinds can also be custom-made for you in non-standard designs.

This type of blind is not suitable for use in roof windows. Tilting standard interior blinds in roof windows becomes up to 50% less effective as the window incline increases.

Technical data

The upper and lower profiles of the blind are made from cold-rolled steel, which is galvanized and finished with baked paint. In the case of the version with a curved exclusive profile, the profile is aluminum. The profile can be supplied in RENOLIT lamination with a wood imitation according to the current offer. Please note that the shade and texture of the foil may vary between individual deliveries. For installation in windows with a glazing bead depth of less than 18 mm, 4 mm thick spacer pads are available to ensure proper installation. This spacer is also used as an additional fastening element for blinds wider than 1200 mm to prevent the profile from sagging in the middle of the window. All plastic and textile parts are color-matched with the profile color. The blind's ladder is made of polyester, and the lifting tape is made of terylene. The fixation of the blind when the window is open is ensured by a nylon cord with a diameter of 0.7 mm, which is fixed at the bottom of the window with a plastic fastening pin. For installation in wooden windows, special wood screws are required.

Maximum and minimum dimensions

Manual control
min. width	200 mm*
max. width	2 000 mm
max. height	2 500 mm
max. area	3,5 m²

The warranty for full functionality does not apply to undersized or oversized blinds.
* - It is technically possible to manufacture a blind with a minimum width of 200mm, but it will not be covered by the warranty for functionality.
** - min. width šírka is depends on the components used

Height of the bundle

Height of the blind	Height of the folded bundle 25mm
0-500 mm	45 mm
1000 mm	60 mm
1500 mm	70 mm
2000 mm	85 mm
2500 mm	100 mm

Maintenance

Blinds are intended for finished interiors. They are not suitable for humid or dusty environments. Condensed water can cause corrosion of the metal parts of the blinds. In dusty environments, the accumulation of dirt on the lift tape may lead to uneven lifting. Remove any obstacles from the blinds' path that could prevent them from lowering or, on the other hand, raising the blinds.

Lowering, raising, and tilting the slats is done by pulling the control chain in one direction or the other, or using the controller in the motorized version. Be careful not to damage or dirty the lifting fabric tape between the slats, as this could cause uneven lifting. The control chain should always be pulled along the window, perpendicular to the top rail! Failing to follow this procedure can result in the ball chain jumping out of the control mechanism! Never manually lift the blind, as this could cause the fabric tape to become loose and creased. If the tape becomes creased, lower the blind completely and manually straighten the tape.

In the case of installing interior blinds on a window frame with insulating double glazing, condensation may occur due to a higher temperature difference between the interior and exterior environments. In such cases, we recommend slightly raising the blinds by 5 - 10 cm at night and opening the slats to allow air circulation toward the glass.

A slight tilt of the blind's operation within a tolerance of ± 3 mm in interior blinds is not considered a defect.

Before cleaning the window, the blind should be raised and secured. The blinds' slats should be cleaned with a dry cloth, as dust combined with water could leave dirty stains on the slats, ladders, and tapes.

Warning!

In accordance with the EU regulation effective from March 1, 2014, all shading devices with a control chain featuring a breakaway system must be installed at least 60 cm above the ground. Shading devices with chain or cord controls must be secured in a fastening device mounted on the wall at a height of at least 150 cm from the ground.

Small children can strangle in loops of pull cords, chains, belts, and internal cords that operate the product.
To prevent strangulation and entanglement, keep cords out of the reach of children.
Cords can wrap around a child's neck.
Move beds, cribs, and furniture away from window blind cords.
Do not tie cords together. Ensure that cords are not twisted and do not form a loop.

Warranty conditions

General Warranty Terms

K-system provides custom-made interior horizontal blinds. Our trained installation professionals will measure and professionally install the blinds for you. Your request will be forwarded to the nearest installation company in your area.

The warranty covers manufacturing defects and material defects that prevent the product from functioning properly.
The manufacturer assumes no responsibility for consequential damages or liability for the product beyond Slovak law.
If a defect is visible upon unpacking the product, do not install it or have it installed, and promptly file a complaint with your supplier.
The warranty does not cover the loss of original color in invisible areas, discoloration, or fading caused by sunlight, condensation, acid rain, salt droplets, or any conditions resulting in corrosion or material change, as well as natural color variations in fabric, aluminum, and wood decor. It also does not cover minor imperfections that do not significantly affect the appearance.
The warranty does not cover any imperfections from the customer's perspective that are caused by adherence to the manufacturing process and applicable standards. For custom products, certain limitations during handling must be expected, and these limitations cannot be the subject of a complaint.
The manufacturer's warranty also does not cover defects or damages that are a direct or indirect result of:

a) Incorrect installation (the warranty is covered by the installation company)
b)   Improper use and failure to follow the operating and maintenance instructions
c)   Use of inappropriate spare parts, accessories, or power sources (e.g., electrical power supply)
d)   Transport or any other form of handling
e)   Interference with the mechanism or modification of the product
f)    Natural disasters, inadequate ventilation, and high humidity.

The manufacturer is not responsible for any breakage of the windowpane glass due to thermal stress. On construction sites, it is necessary to adhere to the following guidelines:

Do not partially close interior and exterior shading elements. Partial shading increases the risk of thermal breakage of the glass (does not apply to tempered ESG glass), which can be eliminated by keeping the shading device at least 6 cm away from the glass.